Blizzard Puck RGBAW Manual do Utilizador descarregar pdf (Página 11)

Page 11

Quick Tips & Tricks:

Problem: The Puck LED readout says “StbY,” (Standby), no output.”

Solution: The Puck is in Slave mode with no master ﬁ xture connected.

Press <MENU>, select “

SLNd,” hit <ENTER>, select “NASt” by pressing up

or down, hit <ENTER> to conﬁ rm. The unit will reset after approximately 10

seconds.

Problem: The Puck is only displaying certain colors (an entire color group of

LEDs is dimly lit or entirely off.)

Solution: The manual color adjustments have been set at levels less than the

full intensity for each color.

Press <MENU>, select “

MANu,” and ensure that all of the color settings (rEd,

GrEE, bLuE, ANbE or WHIt) are set to 255. This is the maximum value

and the ﬁ xture should be left in this mode unless setting a custom standalone

color (See page 9. Should the problem persist, please contact technical sup-

port.

Problem: The fade you’ve selected is too fast/too slow.

Solution: Press <MENU>, select “

SHNd,” hit <ENTER>, select “FAdE,” hit

<ENTER>, and select the speed by selecting “

SP 1 - SP 8,”. 1 is the fastest,

8 is the slowest.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

Blizzard Puck RGBAW Manual do Utilizador Página 11