Blizzard Motif Sketch Manual do Utilizador descarregar pdf (Página 10)

Page 10

Setting the DMX Address

1.) To set the starting DMX address, push the

<S>button.You’llseetheLEDsash3timesina

sequenceofcolorsthatindicatethecurrentlyset

DMX address. For example, if the DMX address is

currently001,theasheswouldbewhite(zero)/

white (zero)/ red(one). (See static color table)

2.)Entera3-digitDMXaddress:001-512.

3.)Nowyou’llseetheLEDsash3timesperdigit

youenter,andnotably,theywillashtheassigned

static color that corresponds to that digit. For

example,settingthexturetotheDMXaddressof

010,theasheswouldbewhite(zero)/red(one)/

white (zero). (See static color table)

Static Colors

Tousextureinstaticcolormode,presseitherthe

<R>, <G>, or <B> buttons, and then one of the numeric buttons (0-9). The color

table below shows the static color for each number.

Static color table

Button 0 Button 1 Button 2 Button 3 Button 4

White Red Orange Light Yellow Green

Button 5 Button 6 Button 7 Button 8 Button 9

Cyan Blue Purple Pink Yellow

DMX Mode

The Motif Sketch™ will automatically recognizes a DMX signal when connected to a

controller, and will function in 3-channel RGB color mixing mode. If the DMX signal is

lost,thexturewillreverttoitspreviouslysetmode.

You can use the remote control while in DMX mode to switch to any other mode.

Then to return to DMX mode, press the <D> button.

3-channel DMX mode

Channel Channel Value What it does...

1 000 <-> 255 RedIntensity(0<-->100%)

2 000 <-> 255 GreenIntensity(0<-->100%)

3 000 <-> 255 BlueIntensity(0<-->100%)

4. OPERATING ADjUSTMENTS

The Remote Control

All the goodies and different modes possible with the Motif Sketch™ are accessed by

using the IR remote control (sold separately).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

Blizzard Motif Sketch Manual do Utilizador Página 10